EMFS

  • Home
  • Services
    • Barriers
    • Safety Crash Barriers
    • CCTV
    • Electrical Services
    • EV Chargers
    • Fibre and Networks
    • Secure Fencing
    • Intercom Pedestals
    • Key Management System
    • Manufacture
    • Mechanical Services
    • Modifications
    • Repairs
    • Roller Shutters
    • Pedestrian Access
    • Sliding Gates
    • Swing Gates
    • Vehicle Loops
    • Underground Ducts
    • Welding
  • Contact
  • Testimonials

Services

  • Barriers
  • Safety Crash Barriers
  • CCTV
  • Electrical Services
  • EV Chargers
  • Fibre and Networks
  • Secure Fencing
  • Intercom Pedestals
  • Key Management System
  • Manufacture
  • Mechanical Services
  • Modifications
  • Repairs
  • Roller Shutters
  • Pedestrian Access
  • Sliding Gates
  • Swing Gates
  • Vehicle Loops
  • Underground Ducts
  • Welding

Repairs

Some photos below are some of the repairs that we have done over the years.

We found a fault inside a duct this was feeding a barrier.We found a fault inside a duct this was feeding a barrier.
We replaced cables.We replaced cables.
Duct repiar.Duct repiar.
Comelit video entry system fault what a mess.Comelit video entry system fault what a mess.
Comelit system fixed this is how it should have been installed.Comelit system fixed this is how it should have been installed.
Fault on camera system wires just twisted together.Fault on camera system wires just twisted together.
We shorten the wires and soldered camers back on and working.We shorten the wires and soldered camers back on and working.
We were called out to look at at a number of faults on a swing gate at a collage. What a messWe were called out to look at at a number of faults on a swing gate at a collage. What a mess
6 Hours later all fixed and labeled every cable6 Hours later all fixed and labeled every cable
New Batteries and Cables fitted to Snorkel S1930 Platform Lifter after bettery theftNew Batteries and Cables fitted to Snorkel S1930 Platform Lifter after bettery theft
Barrier end rest driven over by truckBarrier end rest driven over by truck
Barrier end rest repairedBarrier end rest repaired

EMFS

Electrical, Mechanical and Fabrication Services including Machining & Welding.

EMFS is a trading name of Electrical Mechanical and Fabrication Services Ltd - Company Number 10984714

Phone/Address

Office: 01827 818 175
Workshop: 01827 818 173
34 Hillcrest Close, Spital,
Tamworth, Staffordshire,
B79 8PA